6x12 m Pitched Roof detachable flat pack Container House Delivers 72 m2 of Drainage-Ready Space

72 m2 With a Real Roof, Not a Flat Lid

Two standard modules, joined into one 12 m span, with a pitched roof on top. The 6 x 12 m pitched roof  detachable flat pack container house solves the two complaints that most often stop a flat pack cabin from being specified: not enough floor area, and standing water on the roof. The 5 degree pitch sheds rain quickly, resists snow accumulation and reads as a permanent building to planners, clients and resort guests.

The Numbers That Matter

Scenarios That Fit This Size

A canteen for 40 to 50 people. One unit, one clear span, no internal columns to plan tables around. The pitched roof lifts headroom at the ridge and keeps the kitchen end cooler, which matters in hot climates.

A four-room private dormitory. A central corridor with four rooms and bathrooms gives senior staff or supervisors proper privacy instead of a shared barrack layout.

A training room or site office suite. Glazed partitions, an open-plan desk area and a covered entrance canopy fit comfortably inside 72 m2.

A resort clubhouse or reception. The sloped roof blends with landscaping and reads as a permanent structure, which is often a condition of site licensing.

Why the Roof Detail Matters More Than It Sounds

• Thermal comfort: the ventilated attic space above the ceiling measurably lowers indoor temperature compared with a flat roof.
• No pooling: 5 degree slope and concealed gutters discharge rainwater at the corners, so no perimeter drainage works are needed.
• Snow: the roof is designed for up to 1.0 kN/m2, and the structure can be calculated for heavier local requirements.
• Presentation: a gable roof looks like a building, not a container, which matters for client-facing and hospitality use.

Delivered Ready to Bolt Together

The building ships as two flat packed 6 x 6 m modules with numbered panels, a full assembly drawing, a tool list and a photographic manual. Factory inspection covers frame alignment, panel sealing, electrical safety and water tightness; CE marking, ISO 9001 documentation and third-party inspection are available on request.

Optional additions include external shading, air conditioning, solar power, a kitchen module, sanitary pods and an extended entrance canopy. Confirm the quantity, layout, destination port and certification requirements, and our engineers will reply with drawings and pricing within one working day.