15ft Flat Roof Expandable Container House Cafe Kiosk with Deep Green Ribbed Cladding

15ft Flat Roof Expandable Container House Cafe Kiosk with Deep Green Ribbed Cladding

Product Overview

A 15ft flat roof expandable container house, built as a cafe kiosk rather than a cabin. The starting point is the standard folding module: a steel frame that ships closed at roughly half its working width and folds out on site, with the roof and floor already sealed before it leaves the factory. What changes here is the skin, the front elevation and the ceiling.

The three solid elevations are finished in a deep green horizontal ribbed colour-steel profile, wrapped in the same colour as the frame so the module reads as a single object instead of a box with a skirt. Across the front, two wide glazing bands replace the usual pair of domestic windows, carried in slim black frames over a solid parapet. Inside, the ceiling is a warm wood-tone surface crossed by exposed dark beams and surface-mounted track lights.

The result is a small building that behaves like a shopfront. A timber counter passes through the front opening and serves the terrace; behind it, the interior holds a bar run and a lounge corner. One 15ft module, two zones, no extension needed.

The 15ft module from the front: two glazing bands carried over a solid parapet, with the deep green ribbed skin wrapping the side elevation.

What Makes This Design Different

• Deep green ribbed skin. A horizontal ribbed colour-steel profile on all three solid elevations, colour-matched to the frame and door reveals. The ribs run the full height of the panel, so joints land in shadow lines rather than in the middle of a flat face.
• Ribbon glazing instead of windows. Two wide glazing bands with black frames and a solid parapet below the sill. The band reads as a shopfront from a distance, and it keeps the panel line unbroken between the openings.
• Double glass doors in the front elevation. A full-height black-framed entrance aligned with the serving opening, so the counter, the door and the terrace read as one composition.
• Timber-beam ceiling. Warm wood-tone ceiling panels with exposed dark beams and track lighting mounted on the beams. The ceiling is treated as a designed surface, not a white sheet left as it came off the line.
• Service-and-seat split. The counter serves outward through the front opening while the interior keeps a bar run and a lounge corner, so a single module works as both point of sale and seating area.
• Clean flat roof parapet. No overhang and no visible gutter at the front elevation, which keeps the silhouette a plain rectangle and lets the ribbed skin run edge to edge.

The black-framed double glass doors sit in the same plane as the glazing band, so the entrance reads as part of the shopfront instead of breaking the elevation.

Key Advantages

• Fold-out floor area: the module travels closed and gains its working width on site, so a small footprint on the truck becomes a shop on the ground.
• Freight-efficient series: up to 4 sets of the 10FT model or 2 sets of the 20FT model load into a single 40HQ container. Loading for the 15FT model is confirmed against the production drawing for each order.
• Minimal site labour: a team of two to three general labourers can complete the fold-out and connection within hours using basic lifting equipment. No civil engineering and no wet trades.
• Standardised production: manufactured on a mature assembly line, which keeps unit cost predictable for repeat orders and shortens the payback period for operators running several sites.
• Redeployable asset: the module folds back down and moves to the next location, which matters for seasonal concessions and event retail.

Specifications and Loading Capacity

The 15FT model sits between the 10FT and 20FT entries in this series. Its expanded length, floor area and shipping weight are confirmed against the production drawing for each order, so the figures quoted always match the unit being built. Folded width (2200 mm) and overall height (2480 mm) are common to the series.

Detailed Material Specifications

• Main Steel Frame: Q235 hot-dip galvanized steel, 2.5mm - 3.0mm thickness, with 6mm corner head liner plates for structural safety.
• Wall Panels: external wall 75mm EPS sandwich panel as standard, upgradable to rock wool for fire performance; internal partition 50mm EPS sandwich panel. The exterior face on this design carries the deep green ribbed colour-steel profile.
• Roof System: 0.35mm corrugated colour steel sheet, 50mm EPS insulation, and a 200-type ceiling board internally.
• Flooring: 18mm fireproof magnesite subfloor, moisture-proof and insect-resistant, finished with 2.0mm wear-resistant PVC floor leather; upgradable to 4.0mm SPC flooring.
• Glazing and doors: black-framed glazing bands across the front elevation with a full-height double glass door; opening sizes and frame details are set per layout.
• Ceiling and lighting: wood-tone ceiling panels with exposed beams and surface-mounted track lighting, wired to the destination country's voltage and plug standard.

The ribbed profile runs the full panel height; the frame and reveals are colour-matched so the joints land in shadow lines rather than across a flat face.

Target Applications

• Cafe and coffee kiosks: terrace service counters, espresso bars and small-format coffee shops where the counter has to face the street.
• Resort and campsite hospitality: pool bars, reception pods, beach concessions and breakfast points on glamping sites.
• Retail and brand pop-ups: short-lease shops, event retail and showroom modules that need a designed frontage rather than a white box.
• Hospitality support buildings: garden studios, tasting rooms and guest lounges on wineries, farms and boutique properties.
• Site and commercial welfare: canteens, gatehouses and staffed reception points on larger projects.

Fitted out as a terrace cafe: the counter passes through the front opening and serves outward, while the interior stays a room rather than a serving hatch.

How It Works (Fold-Out Deployment)

1. Set down and level: crane or forklift the closed module onto prepared supports; the folded width keeps it within a standard transport envelope.
2. Release the transport bracing: the folding leaf is braced for shipping and is unbolted once the module is stable on its supports.
3. Fold out the floor and walls: the leaf swings out to form the extra floor area, and the roof section is drawn across and locked.
4. Connect and finish: join the panel edges, seal the joints, connect the pre-wired electrical network and fit the counter and loose furniture.

In its shipping state the module stays at 2200 mm folded width, with the folding leaf braced against the frame for transport.

Inside the Module

Inside the same module: a bar run along the glazed elevation, a lounge corner behind it, and a wood-tone ceiling crossed by exposed beams with track lighting.

Frequently Asked Questions

Is the 15ft size a standard model?
The series is built in 10FT, 20FT, 30FT and 40FT classes, and the 15FT version is produced as an intermediate length. Expanded length, area and weight are confirmed on the drawing before production rather than taken from a generic table.

How much floor area does the fold-out add?
The module travels at 2200 mm folded width and opens to 6480 mm working width across the series, which is where the extra floor comes from. Length stays as ordered, so total area scales with the model you choose.

Can the ribbed cladding be supplied in another colour?
Yes. The ribbed profile is a colour-steel product and the finish is selected per order; the frame and reveals are matched to it so the module stays monochrome.

Is the glazing suitable for a food service unit?
The front is a glazed band over a solid parapet, which gives the shopfront look while keeping the counter line solid. Glass specification, shading and any local food-premises requirement are agreed before production.

How long does installation take?
The fold-out and connection are completed in hours by two to three labourers with basic lifting equipment. Fit-out — counter, shelving, equipment — is a separate step and is usually done by the operator.

Can it be moved after the season?
Yes. The leaf folds back, the bracing is refitted and the module is lifted as one unit, which is the main reason operators use this system instead of a built kiosk.

Does it need a foundation?
No slab is required. The module is set on prepared supports that are levelled before it lands; the support detail depends on ground conditions and is confirmed per site.

What is the lead time and how is it shipped?
The unit is built to order and shipped closed to reduce volume. Loading quantities per 40HQ are confirmed per model, and shipping terms are quoted with the order.

Manufacturer: Global Container (Suzhou) Co., Ltd.